Maintenance Mode Related - Fujitsu PRIMEQUEST 2000 Series Message Reference

MMB Messages
Corrective action:
1. Please confirm the cable of enclosure.
2. Please confirm that enclosure is operating.
3. If the problem persists, please gather the survey material because a detailed investigation is necessary for
that and contact the repair chat channel.
Severity:
Warning
C9A10FA6
Enclosure SAS/SATA mixing not supported (PCIBox or IOU #n-Slot#n-Port#n, Cascade #)
Meaning:
Mixing of SAS and SATA is not supported.
Corrective action:
Please confirm configuration of physical drive of enclosure.
Severity:
Warning
C9A10FA7
Enclosure firmware download failed (PCIBox or IOU #n-Slot#n-Port#n, Cascade #)
Meaning:
The firmware update failed.
Corrective action:
Please gather the survey material because a detailed investigation is necessary for that and contact the
repair chat channel.
Severity:
Warning
C9A10FA8
Enclosure communication lost (PCIBox or IOU #n-Slot#n-Port#n, Cascade #)
Meaning:
The connection to enclosure is down.
Corrective action:
1. Please confirm the cable of enclosure.
2. Please confirm that enclosure is operating.
3. If the problem persists, please gather the survey material because a detailed investigation is necessary for
that and contact the repair chat channel.
Severity:
Warning

2.1.20 Maintenance mode related

The messages related to the maintenance mode are listed below.
CC6F00FF
Enter Hot Maintenance
Meaning:
The hot maintenance mode is activated.
Corrective action:
No action is necessary.
Severity:
Info
CC6F01FF
Enter Partition Maintenance (In case PRIMEQUEST 2400E/2800E)
Enter Hot Maintenance (In case PRIMEQUEST 2800B)
Meaning:
The partition maintenance mode is started.
Corrective action:
C122-E178-02EN
74