Transport damages Dear customer, When unpacking the appliance, check that it is not Please read these operating instructions carefully damaged. If in doubt, do not use it and contact the and pay particular attention to the safety notes Service Centre. indicated in the first pages.
Warnings The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation • Always check that water has emptied out before opening the door. If not, drain the water following •...
Disposal Packaging materials This means that they can be recycled by disposing of them properly in appropriate collection containers. The materials marked with the symbol recyclable. Machine >PE<=polyethylene >PS<=polystyrene Use authorised disposal sites for your old appliance. >PP<=polypropylene Help to keep your country tidy! Tips for environmental protection •...
Installation Unpacking Positioning Install the machine on a flat hard floor. All transit bolts and packing must be removed Make sure that air circulation around the machine is before using the appliance. not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen You are advised to keep all transit devices so that units.
This could be done by tying it to the tap with a piece Electrical connection of string or attaching it to the wall. This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use.
Door reversal The opening direction of the outer door on this washing machine can be reversed. To carry out this operation, proceed as follows: 1) Disengage the end of the opening stop (1) from the door and turn it through 90° to remove it from its seat (Fig.
Control panel 1 Detergent dispenser drawer 5 On/Off button Press this button to start the machine. The same button is used to switch the machine off. Prewash Before selecting a programme or changing an ongoing programme the machine must be Main wash switched off by depressing the On/Off button.
Delicate fabrics and woollens: drum no more than Washing hints one third full. Washing a maximum load makes the most efficient Sorting the laundry use of water and energy. For heavily soiled laundry, reduce the load size. Follow the wash code symbols on each garment label and the manufacturer’s washing instructions.
Lipstick: moisten with acetone as above, then treat Quantity of detergent to be used stains with methylated spirits. Remove any residual The type and quantity of detergent will depend on marks from white fabrics with bleach. the type of fabric, load size, degree of soiling and Red wine: soak in water and detergent, rinse and hardness of the water used.
Duration of the drying cycle Drying hints The drying time can vary according to As a dryer, the machine works on the condensation • the final spin speed; principle. • the required degree of drying (store dry or iron Therefore, the water tap must be open and the dry);...
International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max. wash temperature temperature temperature temperature 95°C 60°C 40°C 30°C Hand wash Do not...
4. Select the temperature and the Operating sequence desired option Turn the dial to the required setting and depress Before washing your first load of laundry, we button if required. recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub.
Programme table Washing programmes for cotton and linen Max. load: 5 kg Consumptions* Additional Programme Temp. Fabrics function Energy Water Duration min. 60°-90° WHITES WITH PREWASH, for example work garments, sheets, household linen, underwear, towels 40°-60° COLOUREDS WITH PREWASH, sheets, underwear, towels, shirts,blouses WHITES WITHOUT PREWASH, 60°-90°...
Programme table Washing programmes for synthetics, mixed fabrics, delicates and wool Max. load: 2.5 kg, wool 2 kg Consumptions* Addi- Programme Temp. Fabrics tional Energy Water Duration function min. 30°-60° SYNTHETICS WITH PREWASH, for 1.25 example underwear, coloured items, shirts, blouses SYNTHETICS WITHOUT PRE- 30°-60°...
Programme table Drying times Degree of Drying time Type of fabric Max. load Spin speed drying mins Cotton and linen 2.5 kg 1000 (towels, T-shirts, black sector bathrobes) 1000 Store dry (*) black sector Suitable for items to put Synthetics and away without mixed fabrics ironing...
Maintenance 1. Bodywork 3. Drain filter Clean the outside of the machine with warm water The drain filter collects threads and small objects and a neutral, non-abrasive household detergent. inadvertently left in the laundry. Check regularly that Rinse with clean water and dry with a soft cloth. the filter is clean.
5. Emergency emptying out If the water is not discharged (outlet pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; •...
Something not working? Problems which you can resolve yourself. Problem Possible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. •...
Page 20
Problem Possible cause • Spinning starts late or the • The electronic unbalance detection device has cut in because the laundry is not evenly distributed in machine does not spin: the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disappears and normal spinning can resume.