Yamaha RHINO YXR45FW Owner's Manual page 34

G two tripmeters (which show the distance
traveled since they were last set to zero)
a clock
G
an hour meter (which shows the total time
G
the key has been turned to "ON")
a fuel meter
G
Odometer and tripmeter modes
Pushing the "TRIP/ODO" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "A" and "B" in the fol-
lowing order:
ODO→TRIP A→TRIP B→ODO
To reset a tripmeter, select it by pushing the
"TRIP/ODO" button, and then push the "TRIP/
ODO" button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fu-
el. This information will enable you to plan
future fuel stops.
NOTE:
_
Holding in the "TRIP/ODO" button and then
turning the key to "ON" switches the display
between "mph" and "km/h".
_
4-9