Replacing The Fuse; Removing A Wheel - Yamaha RAPTOR 50 Owner's Manual

EBU25232

Replacing the fuse

1
1
2
3
4
5
6
7
1. Fuse
2. Spare fuse
8
The fuse holder is located under the seat. (See
9
page 4-13.)
If the fuse is blown, replace it as follows.
10
1. Turn the key to "OFF" and turn off all electrical
circuits.
11
ECB00640
CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
Specified fuse:
5.0 A
EWB02151
POTENTIAL HAZARD
Using an improper fuse.
WHAT CAN HAPPEN
An improper fuse can cause damage to the
electrical system, which could lead to a fire.
HOW TO AVOID THE HAZARD
Always use a fuse of the specified rating.
Never use a material in place of the proper
fuse.
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
EBU25650

Removing a wheel

1. Loosen the wheel nuts.
8-30
WARNING