Table of Contents
Advertisement
1
1. Trim tab
2. Bolt
3. Cap
EMU26340
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
1. Tilt support lever
3
2
B
A
ZMU02525
A
B
ZMU01863
1
ZMU03979
Basic components
EMU26400
Top cowling release lever
The top cowling can be removed by operat-
ing the cowling release lever. Pulling the
front lever unlocks the top cowling for remov-
al.
When installing the top cowling:
1.
Set the top cowling straight down onto
the engine, being careful to avoid catch-
ing spark plug wires or other wires.
2.
Align the three cowling hooks with the
locks on the bottom cowling.
3.
Press down on the top of the cowling at
the front and both sides of the back until
the three locks click.
4.
To make sure the cowling is locked
properly push the cowling from each
side. If it lifts, repeat step 3.
ECM00070
CAUTION:
Make sure the cowling lock connection
G
ZMU03518
ZMU03519
16
Advertisement
Table of Contents
