Yamaha XL700Y WaveRunner Owner's/Operator's Manual page 46

EJU00452a
Switches
First, place the vehicle in the water to pro-
vide adequate engine cooling. Start the
engine, then pull the engine stop switch
lanyard on your left wrist to remove the
lock plate from the engine stop lanyard
switch. Verify that the engine stops imme-
diately. Be sure the lanyard is in good
GU2074
condition with no frayed or broken parts.
A damaged lanyard must be replaced; it
should never be repaired or tied together.
Refer to pages 3-11 to 3-13 "STARTING
THE ENGINE", for information on proper
operation of the starter switch.
Lanyard
Engine stop lanyard switch
Lock plate
EJU00453
Cooling water pilot outlet
Check that water comes out from the out-
let while engine is running in the water.
Refer to page 2-9 for correct operation of
the device.
F0M075
3-8
E