Table of Contents
Advertisement
CONSUMER INFORMATION
1. Model label
EAU01804
Model label
The model label is affixed to the frame
under the rider seat. (See page 3-8 for
rider seat removal and installation pro-
cedures.) Record the information on
this label in the space provided. This in-
formation will be needed when ordering
spare parts from a Yamaha dealer.
9
9-2
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the VIRAGO XV250R and is the answer not in the manual?
Questions and answers
Hello, virago 250 (01) tail light doesn't work but brake light does, tried different bulbs, fuse, grounds, I noticed ignition is after market and I noticed one tiny ground (black/white) coming from ignition cylinder it was left behind no connected to anything probably extra on the aftermarket ignition cylinder. I followed yellow and blue (+/-) from bulb socket and goes to headlight, everything seems connected, I can just try to connect direct power to those cables to see if lights up but can't figure out, I also checked light switch and everything looks fine. Thanks
If the brake light works but the tail light does not on a Yamaha Virago XV250R, the cause could be:
- A burned-out tail light bulb filament (the bulbs often have separate filaments for tail and brake lights).
- A faulty tail light circuit or loose connection.
- A blown fuse affecting the tail light only.
- A malfunction in the switch or wiring that supplies power to the tail light when the ignition is ON.
Since the brake light uses the same bulb but a different circuit, the issue is likely specific to the tail light power supply or bulb filament.
This answer is automatically generated