Xyron PRO 1250 User Manual

Adhesive Application and Laminating System
U S
Adhesive Application &
Laminating System
Your Xyron Pro1250 is designed to permanently apply an adhesive or clear film to the
front and/or back of any substrate that is run through the machine. The lamination film
and adhesive are not designed to be removed without substantial damage to the laminated
substrate or mounting surface. This process is NOT recommended for any precious or single
source documents. Always test before use – may not be compatible with some surfaces.
The system is designed to be used with one of the following replacement cartridges:
DL1201-150
SL1201-150
LAT1201-100
LAT1206-100
AT1201-100
AT1202-100
AT1205-100
AT1206-100
Consult your authorized Xyron dealer for information on other supplies.
Please follow the attached directions carefully.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500
E R ' S
Two-Sided Lamination – General Use – 150'
Single-Sided Lamination – General Use – 150'
One Side Laminate / One Side Adhesive Application – High Tack – 100'
One Side Laminate / One Side Adhesive Application – Repositionable – 100'
Adhesive Application – High Tack – 100'
Adhesive Application – Low Tack – 100'
Adhesive Application – Acid Free – 100'
Adhesive Application – Repositionable – 100'
Pro 1 250
®
G U I D E