Zanussi ZGF 326 Instruction Booklet
  1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Hob
  5. ZGF 326
  6. Instruction booklet
Zanussi ZGF 326 Instruction Booklet

Zanussi ZGF 326 Instruction Booklet

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZGF 326

Summary of Contents for Zanussi ZGF 326

  • Page 2: For Your Safety

    Repairs carried out by installing a cooker hood with discharge tube. unexperienced persons may cause injury or serious malfunctioning. Refer to your local Zanussi Service • In case of intensive or long time use of the Centre.

  • Page 3: Table Of Contents

    Contents 1. Instruction for the User .... Pag. 5. Electrical Connection ....Pag. 6. Adaptation to different 2. Cleaning and Maintenance ..Pag. types of gas ........ Pag. 3. Technical Data ......Pag. 7. Building In ........Pag. 4. Instruction for the Installer ..Pag. 1.

  • Page 4: Cleaning And Maintenance

    2. Cleaning and Maintenance • Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food.

  • Page 5: Instruction For The Installer

    4. Instruction for the Installer The following instructions about installation and IMPORTANT - To ensure a correct operation, a saving maintenance must be carried out by qualified of energy and the long-life of the appliance, the feeding personnel in compliance with the regulation in pressure of the appliance must correspond to the force.

  • Page 6: Electrical Connection

    5. Electrical Connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label);...

  • Page 7: Adaptation To Different Types Of Gas

    6. Adaptation to different types of gas INJECTORS REPLACEMENT • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2).

  • Page 8: Building In

    7. Building In A = Auxiliary burner R = Rapid Burner These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 9. FO 0952 Fig. 9 INSTALLATION AND ASSEMBLY These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in...

Table of Contents