Table of Contents
Advertisement
What's Inside Your EW-36/EW-66 Battery
The Battery is composed of four 12 Volt, 20 Amp-hour
capacity batteries, in series, for a total capacity of 48 V,
20 Ah.
The component batteries are a standard, commercially
available size. Keep three things in mind, however,
should you choose to service your battery.
1) The batteries are soldered into place. Replacing
batteries will require soldering equipment and
skills.
2) Batteries can be extremely dangerous. If allowed
to short-circuit, they can cause burns, create
blinding arcs, or explode, causing serious injury. If
you accept this risk, work slowly, and exercise
utmost care! Work with only one wire at one time.
3) Batteries solder, and soldering vapors contain lead,
a toxic substance that can build up in your body.
Minimize your exposure to lead by wearing gloves,
providing good ventilation when soldering, and
washing hands after soldering or handling
batteries. You should NEVER simultaneously solder
and eat snack foods!
Battery Trouble
Should a battery ever leak, do not touch the battery
liquid. If you are exposed to the solution, flush the
affected area with water. If you must handle the battery,
wear disposable gloves.
18
www.ActiveForever.com
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EW-36 and is the answer not in the manual?
Questions and answers
My ew36 scooter turns on but won't move, forward or backwards. Batteries are new throttle m8ves as it should. The scooter did stop and I had to hit the reset to get to turn on.
If the E-Wheels EW-36 scooter turns on and has new batteries but will not move forward or backward, check the following:
1. Forward/Reverse Switch – Ensure it is set correctly.
2. Speed Dial – Set it to an appropriate speed instead of the lowest setting.
3. Throttle Operation – Twist the throttle slowly to engage movement.
4. Battery Charge – Even with new batteries, they must be fully charged before use.
5. Power Switch – Confirm the scooter is fully powered on.
6. Deep Discharge – If the previous battery was deeply discharged, there could be system issues.
If none of these resolve the issue, contact customer service for further assistance.
This answer is automatically generated