Table of Contents
Advertisement
Fuse
The EW-36/EW-66 comes with one 25A Glass Fuse. The
fuse is located under the headlight fairing.
Lubrication
You should inspect and maintain your EW-36/EW-66 and
lubricate the mechanical power transmission components.
The brake cables may also need lubrication
Lubricate the brake cables with silicone or graphite
lubricant. Maintenance period: one month.
Lubricate the fork Shock Absorber tube, axle rim, and the
axle ball bearing with SH/T0386 lubricant, bicycle or
lithium grease. Maintenance period: one year.
Cleaning
1) Never wash the bike using high-pressure water, as
it will cause damage to the electric bike.
2) Never use lubricant to clean the metal parts of the
bike and never apply lubricant to the drum brake
and the tire.
24
www.ActiveForever.com
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EW-36 and is the answer not in the manual?
Questions and answers
My ew36 scooter turns on but won't move, forward or backwards. Batteries are new throttle m8ves as it should. The scooter did stop and I had to hit the reset to get to turn on.
If the E-Wheels EW-36 scooter turns on and has new batteries but will not move forward or backward, check the following:
1. Forward/Reverse Switch – Ensure it is set correctly.
2. Speed Dial – Set it to an appropriate speed instead of the lowest setting.
3. Throttle Operation – Twist the throttle slowly to engage movement.
4. Battery Charge – Even with new batteries, they must be fully charged before use.
5. Power Switch – Confirm the scooter is fully powered on.
6. Deep Discharge – If the previous battery was deeply discharged, there could be system issues.
If none of these resolve the issue, contact customer service for further assistance.
This answer is automatically generated