Advertisement
UNPACKING INSTRUCTIONS
•
Remove all parts and packing materials
from carton.
•
Check carton contents against list. Be sure
all parts are there.
TOOLS REQUIRED FOR ASSEMBLY
(2) 9/16" Wrenches
(2) 1/2" Wrenches
(2) 7/16" Wrenches
(1) 9/16" Socket & Ratchet
Standard Screw Driver
Ft/Lbs Torque Wrench
PARTS IDENTIFICATION
COVER
ASSEMBLY
GRASS
CATCHER
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you
are seated on the mower in the operator's position.
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in "NEUTRAL " position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact with plug.
6
CARTON CONTENTS:
2 - Container Tops
2 - Container Bottoms 1 - Inlet
1 - Hose
1 - Lower Chute
2 - High Lift Blades
CAUTION
1 - Cover Assembly
1 - Bag of Parts
1 - Owner's Manual
HOSE
LOWER CHUTE
Advertisement
