Siemens Gigaset DL500A User Manual page 18

Connection
GigasetDX600A ISDN
GigasetDX800A all in one
for connection to ISDN and VoIP
GigasetDX800A all in one
for connection to the analogue
fixed line and VoIP
Please note:
u
If the installation wizard is activated, no other handset can access the Settings
menu on the base.
u
To quit the installation wizard before the process is complete, press and hold the
red end key T. All changes you have already saved using
To skip a setting, press left on the control key u or the display key
u
1. ISDN wizard: Assigning/entering the connection's MSNs
Is started on Gigaset DX600A ISDN, Gigaset DX800A all-in-one with ISDN connection.
Prerequisite: You have connected the base to the ISDN telephone network.
Several numbers (MSNs) were provided by the network provider when you
received your ISDN connection confirmation. You can save up to ten numbers
(MSNs) on your base. If there is no MSN entered on your base, you can determine
the MSNs of your connection with the ISDN wizard, i.e., call them up from the
exchange (automatic MSN assignment) or enter them manually.
Please note
Not every ISDN provider supports automatic MSN assignment. If this feature is
not supported, you must enter the MSNs for your connection manually.
Procedure
¢
1. ISDN wizard ( page 17)
3. Registration wizard
4. Connection wizard
¢
1. ISDN wizard ( page 17)
2. IP wizard
3. Registration wizard
4. Connection wizard
¢
2. IP wizard ( page 20)
3. Registration wizard
4. Connection wizard
First steps
§OK§
are retained.
§No§
.
17