Using The Handset As An Alarm Clock; Restoring The Handset Default Settings; Base Station Settings; Changing The System Pin - Siemens Gigaset E360 User Manual

Activating/deactivating advisory
tones
¢
§Menu§
Audio Settings
¢
Advisory Tones
Setting the battery warning tone
¢
§§Menu§
Audio Settings
¢ ¢
§OK§
Low On / Off / During Call
¢
§OK§
(‰ = on)
The battery warning tone is activated or
deactivated or sounds during a call.
Using the handset as an
alarm clock
Activating/deactivating the alarm
clock
Requirement:
The time is set (see page 7).
¢
§Menu§
Alarm Clock
¢ ¢
Activation
After you activate the alarm clock, the menu
for setting the wake up time opens automat-
ically.
If the alarm clock is set, the wake up time
appears with the l icon in the display.
Setting the wake up time
¢
§Menu§
Alarm Clock
¢ ¢
§OK§
time
¢
§OK§
When the alarm clock rings...
Press the display key
tivate the alarm clock for 24 hours.
If you do not press any key, the alarm clock
switches off after one minute.
¢
§OK§
¢
§OK§
(‰ = on)
¢ ¢
§OK§
Battery
¢
OK§
§OK§
(‰ = on)
¢ ¢
§OK§
Wakeup
Enter wake up timen
§Off§
or any key to deac-
Restoring the handset
default settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list or the
handset's registration on the base station.
¢ ¢
§Menu§
Settings
¢ ¢
§OK§
Reset Handset
Cancel the reset with a.

Base station settings

The base station settings are carried out
using a registered Gigaset E36 handset.

Changing the system PIN

You have to enter the system PIN when regis-
tering a handset on the base station.
You can change the base's 4-digit default
system PIN ("0000") to a 4-digit PIN known
only to yourself.
¢ ¢
§Menu§
Settings
¢ ¢
System PIN
¢ ¢
New PIN:
Should you forget the system PIN, you can
reset the base station to the original
code 0000:
Remove the mains cable from the base sta-
tion. Press and hold down the registration/
paging key (page 1) on the base station
while you reconnect the mains cable to the
base station. Release the key after a short
while.
The base station is now reset and the system
PIN is set to 0000.
Base station settings
¢
§OK§
Handset
¢
§OK§
¢ ¢
§OK§ §OK§
Base
¢ ¢
§OK§ §OK§
PIN:
§OK§
21