Minimum Flue Vent Configuration - Harman Stove Company P61-2 Owner's Manual

3" min.
3" min.
PL vent manufacturer's
firestop spacer and support
#8 Installing through the ceiling vent
Through the ceiling vent, follow PLvent
manufacturers recommendations when using wall
and ceiling pass through.
Storm collar
Flashing
3" min.
No insulation or
other combustible
materials
allowed within 3"
of the PL vent pipe.
(See Page 9 for
c o r n e r
i n s t a l l a t i o n
clearances)
Fig. 14
Fig. 16
Venting
Minimum flue vent
configuration
are
It is recommended that
outside air be installed with this
venting configuration.
DO NOT INSTALL A FLUE DAMPER IN THE
EXHAUST VENTING SYSTEM OF THIS UNIT.
DO NOT CONNECT THIS UNIT TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE.
INSTALL VENT AT CLEARANCES SPECIFIED
BY THE MANUFACTURER
DO NOT INSTALL IN SLEEPING ROOM
THE STRUCTURAL INTEGRITY OF THE
MOBILE HOME FLOOR, WALL, AND CEILING/
ROOF MUST BE MAINTAINED.
THE STOVE IS HOT WHILE IN OPERATION.
KEEP CHILDREN, CLOTHING AND
FURNITURE AWAY. CONTACT MAY CAUSE
SKIN BURNS.
11
Fig. 15
WARNING
CAUTION
CAUTION