Jumper & Connector Description; Motherboard Jumper Setting; Selection For Processor Cpu Clock; Other Functionality - TRIGEM ANAHEIM2 Manual

III. Jumper & Connector Description
1.

Motherboard Jumper Setting

J9
J1 – J8

1-1. Selection for Processor CPU Clock

Intel Celeron PPGA Processor is auto set the core to bus frequency ratio.
1-2. System functionality
Jumper Pin
J4 FDD write protect
J5 CMOS setup function
J6 CMOS RAM function
J7 Audio Function(AMR)
J8 Password function

1-3. PCI graphics device function

No jumper does set the functionality of the GMCH graphics controller
PCI Graphics device operates automatically if PCI Graphics card is inserted .
Function
Enable write/save Enable to
Enable to edit CMOS
Primary_down enable
Enable password
1-2(Default)
write data
Disable to edit CMOS contents
contents
Normal
9/15
2-3
Disable to write data
to Floppy disk
Clear CMOS RAM
Primary_down disable
disable password