Table of Contents
Advertisement
Enhancing your system (continued)
XL-MP80H
ENGLISH
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Connection cable
for digital recording
(not supplied)
E-29
! Listening to the playback sounds from VCR,
1
White
2
3
Red
4
Note:
To prevent noise interference, place the unit away from the televi-
RCA lead
sion.
(not supplied)
! To record CD signals on MDs
White
VCR, DVD, etc.
The digital signal from this unit can be recorded by MiniDisc record-
ers, etc.
1
Red
2
To the line output sockets
3
4
5
MD recorder
Notes:
" When using the optical digital socket, remove the cap first. After
" Only CD signals can be output.
! To record on a tape
To the optical line
1
input socket
2
3
4
5
DVD, etc.
Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
Play the connected equipment.
Remove the DIGITAL OUT socket cover.
Use a connection cable for digital recording to connect the unit to
the OPTICAL IN socket of a MiniDisc recorder, etc.
Press the ON/STAND-BY button to turn the power on.
Put the MiniDisc recorder, etc. in the recording mode.
Play a CD on this unit.
using the socket, replace the cap.
Load a cassette into the cassette compartment with the side to
be recorded on facing you.
Press the VIDEO/AUX button.
Press the TAPE
(
) button.
Press the
( ) button.
Play the VCR, DVD, etc.
04/3/25
XLMP80HH_E.fm
TINSZA021SJZZ
Advertisement
Table of Contents
