Specifications - Toshiba D-VR18DTKB Owner's Manual

E9NG1BD_EN.book Page 95 Monday, April 7, 2008 5:54 PM

Specifications

General
VCR video heads
Power requirements
Power consumption
Power consumption (standby)
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV system
Recording
Recording format
Recordable discs
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
Tuner
Receivable channels
Input/Output
Front Panel : (AV3)
Video input
Input level
Audio input
Input level
DV input
DV 4-pin jack
Rear Panel :
VHF/UHF antenna input/output terminal
Audio input /output
Video input /output
Input /output level
Component video output
Output level
Audio output
Output level
Digital audio output
Output level
HDMI output
Note
The specifications and design of this product are subject to change without notice.
Four heads
220–240 V ± 10%, 50 Hz ± 0.5%
35 W
5.0 W (When "FL Dimmer" is set to "OFF": 3.3 W)
4.9 kg
435 x 99.5 x 388 mm
5°C to 40°C
Less than 80% (no condensation)
PAL-I
Video Recording (VR) format (DVD-RW only),
Video format (DVD-RW, DVD-R)
+VR format (DVD+RW, DVD+R)
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable
13.5 MHz
MPEG
48 kHz
Dolby Digital
IRA-E69 (For analogue channels)
E21-E69 (For DVB-T channels)
One RCA connector
1Vp-p (75 Ω)
Two RCA connectors
2Vrms (input impedance: more than 10kΩ)
IEEE 1394
VHF/UHF set 75 Ω
Two 21-pin scart sockets (AV1, AV2)
Two 21-pin scart sockets (AV1, AV2)
1Vp-p (75 Ω) each
Three RCA connectors
Y: 1.0Vp-p (75 Ω)
P /C , P /C : 0.7Vp-p (75 Ω) each
B B R R
Two RCA connectors
2Vrms (output impedance: 680 Ω)
One Coaxial pin jack
500mVp-p (75 Ω)
HDMI jack
95
EN