Table of Contents
Advertisement
Quick Links
SET UP ANd OPErATiNg iNSTrUCTiONS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVE THiS MANUAl.
Copyright
2000 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 10g
BENCH TOP
CUT-OFF SAW
Model
. All rights reserved. No portion of this manual or any artwork
®
42307
Advertisement
Table of Contents
Related Manuals for Drill Master 42307
Summary of Contents for Drill Master 42307
- Page 1 Failure to do so can result in serious injury. SAVE THiS MANUAl. Copyright 2000 by Harbor Freight Tools © contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve- ments, actual product may differ slightly from the product described herein.
-
Page 2: Important Safety Information
SKU 42307 For technical questions, please call 1-800-444-3353. NOTiCE is used to address practices not related to personal injury. CAUTiON, without... - Page 3 ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eye- SKU 42307 For technical questions, please call 1-800-444-3353. glasses only have impact resistant lenses, they are NOT safety glasses.
-
Page 4: Grounding Instructions
If it still does not fit, contact a qualified electrician to install the SKU 42307 For technical questions, please call 1-800-444-3353. proper outlet. Do not change the plug in any way. - Page 5 Industrial applications must follow OSHA guidelines. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or miss- ing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Prepare to begin work before turning on the tool.
- Page 6 Let the tool do the work. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE iNSTrUCTiONS. SKU 42307 For technical questions, please call 1-800-444-3353. Page 6...
-
Page 7: Specifications
The mounting surface must be flat, level and capable of supporting the weight of the Saw combined with the materials to be cut. The Saw can also be mounted by securing the top of the Clamp (24) into its slot (See Assembly Diagram) and tighten- ing the bottom of the clamp to the desired work surface. -
Page 8: Operation
Vise Fixture (22) Vise Handle (11) OPErATiON When operating your Mini Cut-Off Saw, it will be helpful to refer to Figure 1 as well as to the Parts List and Assembly Diagram near the end of this manual. Setting the Vise The Miter Gauge on the Vise (9) can be set from 0°- 45°. -
Page 9: Maintenance And Servicing
Motor Housing (36). Regularly clean the work surface with a vacuum cleaner or a dry brush. At the end of SKU 42307 For technical questions, please call 1-800-444-3353. every work session remove sawdust from the motor vents. Prevent wood, dust and debris from accumulating in the working area. -
Page 10: Please Read The Following Carefully
Base Vise Handle Driving Pulley Screw Bearing Spindle Arbor HSS Saw Blade Washer Screw Blade Guard Vise Fixture SKU 42307 For technical questions, please call 1-800-444-3353. PArTS liST Qty. Part description Clamp Vise Jaw Spacer Safety Lever Spring Ring Motor Housing A... -
Page 11: Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 42307 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Limited 90-Day Warranty
90 dAY WArrANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 42307 and is the answer not in the manual?
Questions and answers