Mitsubishi Electric WD-60C10 Service Manual page 39

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-65638 / WD-73638 /
WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
4. In the Bottom 16:9 Alignment Mode, pressing (V43C & V43
< >) will cause the geometry pattern to be displayed with 15 different preset amounts of correction to the
Bottom Red 16:9 Line. Toggle through them until you find the one with the straightest Bottom Red 16:9
Line. Again, count the patterns as you cycle through them. When you find the pattern with the straightest
line, press <ENTER> to exit and save the 4:3 and 16:9 data.
5. Select the Geometry Test Pattern (See HVPOS). If Geometry is acceptable, press <EXIT> to quit.
Select Straightest Red Line (Bottom)
<CH
4:3 MODE
Page 39
> or <CH >) (V43+ & V43++ < > or