Table of Contents
Advertisement
5" RANDOM ORBITAL
PALM SANDER
93431
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
®
Copyright
2005 by Harbor Freight Tools
. All rights reserved. No
portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 93431
Summary of Contents for Chicago Electric 93431
- Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353.
-
Page 2: General Safety Rules
Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 93431 For technical questions, please call 1-800-444-3353. t i r "... -
Page 3: Electrical Safety
Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. SKU 93431 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY... -
Page 4: Tool Use And Care
Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SKU 93431 For technical questions, please call 1-800-444-3353. TOOL USE AND CARE... -
Page 5: Specific Safety Rules
Avoid unintentional starting. Make sure you are prepared to begin work before plugging in the Sander. Do not force the Sander. This tool will do the work better and safer at the speed and capacity for which it was designed. - Page 6 Always unplug the Sander from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
-
Page 7: Grounded Tools: Tools With Three Prong Plugs
The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See Figure A.) FIGURE A SKU 93431 For technical questions, please call 1-800-444-3353. GROUNDING WARNING! -
Page 8: Double Insulated Tools: Tools With Two Prong Plugs
Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) Note: This tool has a 2 Prong Plug. FIGURE B SKU 93431 For technical questions, please call 1-800-444-3353. Page 8... -
Page 9: Extension Cords
Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. SKU 93431 For technical questions, please call 1-800-444-3353. EXTENSION CORDS Page 9... -
Page 10: Attaching The Dust Bag
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13. -
Page 11: Operating Instructions
NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13. CAUTION: Always make sure the Power Cord (13) of the Sander is unplugged from its electrical outlet prior to making any adjustments to the tool. -
Page 12: Inspection, Maintenance, And Cleaning
INSPECTION, MAINTENANCE, AND CLEANING WARNING! Make sure the Power Switch (15) of the Sander is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. BEFORE EACH USE, inspect the general condition of the Sander. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. -
Page 13: Assembly Diagram
NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93431 For technical questions, please call 1-800-444-3353. ASSEMBLY DIAGRAM (29) Sanding Disc (80 Grit) not shown Page 13...
Need help?
Do you have a question about the 93431 and is the answer not in the manual?
Questions and answers