Range Testing The Dx6I; How To Range Test The Dx6I; Power Setting - Spektrum DX6I User Manual

RANGE ChECK
RANGE CHECK: When activated the Range Check screen allows for a range check by using the trainer switch to
reduce the output power.
TO ENTER ThE RANGE ChECK fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen release the
roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST,
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST, then pressing the roller.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
Rotate the roller to highlight RANGE CHECK then press the roller to access the RANGE CHECK function.
Reduce photo to 13.5%
SETUP LIST
TIMER
RANGE CHECK

POWER SETTING

50
Main
Main
9
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
RANGE ChECKING A MODEl
Rotate the roller to highlight RANGE and press the roller to access the range function.
RANGE CHECK
CHECK

hOW TO RANGE TEST ThE DX6I

RANGE TESTING ThE DX6I

1. With the model on and resting on the ground, stand 30 paces (approx. 90 feet) away from the model.
2. Face the model with the transmitter in your normal flying position. Place the transmitter in the range
test screen (see above) and pull and hold the trainer switch on the top of the transmitter. This causes
reduced power output from the transmitter.
3. You should have total control of the model with the button depressed at 30 paces (90 feet).
Pull and hold the trainer switch
4. If control issues exist, call the Horizon Product Support Team at 1-877-504-0233 for further assistance.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
List
INH
30 paces (90 feet)
51