Table of Contents
Advertisement
Quick Links
Self-leveling Laser Level
Item 92703
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-800-444-3353 as soon as possible.
©
Copyright
2005 by Harbor Freight Tools
or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape
Manual Revised 11f
Advertisement
Table of Contents
Related Manuals for Pittsburgh 92703
Summary of Contents for Pittsburgh 92703
- Page 1 2005 by Harbor Freight Tools or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
-
Page 2: Important Safety Information
11. Stay alert, watch what you are doing and use common sense when operating Laser Level. Do not use Laser Level while you are tired or under the influence of drugs, alcohol or medication. 12. Dress properly. Do not wear loose clothing or jewelry. - Page 3 5. Attach the Laser to the tripod base. Do this by threading the bolt at the top of the tripod through the holes at the center of the Laser Level’s lower base. 6. Level the Laser by using the tri-brack adjustment screws until the bubbles are centered on the two levels.
- Page 4 “ON”. Vertical Line Button 5. The Laser Level will work properly if it is positioned within its self-leveling range. 6. Allow 4-6 seconds for the horizontal and vertical Laser lines to be stabilized.
-
Page 5: Installing And Removing Batteries
3. Store the Laser Level indoors and out of children’s reach. REV 07h SKU 92703 For technical questions, please call 1-800-444-3353. Accuracy Checking NOTE: Due to the complicated, sensitive nature of these procedures, ordinarily only a qualified technician would attempt them. - Page 6 6. Measure the distance between M1 and M2. 7. If the distance is less than or equal to 2 mm, the accuracy is within tolerance. Otherwise, take the instrument to a qualified technician for repair. SKU 92703...
-
Page 7: Please Read The Following Carefully
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 07h SKU 92703 For technical questions, please call 1-800-444-3353. QUANTITY Page 7... - Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 92703 and is the answer not in the manual?
Questions and answers