Summary of Contents for Kirkland Signature 720-0108
Page 1
ASSEMBLY & OPERATING INSTRUCTIONS FOR OUTDOOR USE ONLY Model: 720-0108 PLEASE CONTACT 1-800-913-8999 FOR ASSISTANCE ABOUT ASSEMBLY OR GRILL OPERATION DO NOT RETURN TO THE PLACE OF PURCHASE...
Page 2
FOR YOUR SAFETY If you smell gas: Shut off gas to the appliance. Extinguish any open flames. Open lid. If odor continues, immediately call your gas supplier or your fire department. WARNING Do not try to light this appliance without first reading the “LIGHTING INSTRUCTIONS”...
MESSAGE TO OUR CONSUMERS Thank you for selecting our stainless steel gas grill. Because this appliance contains features which may not found on other grill, we recommend that you read this entire booklet before your first use. Keep it in handy place as it has answers to questions that may occur during future use.
PRECAUTIONS FOR YOUR SAFETY CALIFORNIA PROPOSITION 65-WARNING If you smell gas: The burning of gas fuel generates some by- Shut off gas to the appliance. products, which are on the list of Extinguish any open flames. substances, which are known by the State of California to cause cancer or Open lid.
Page 5
PRECAUTIONS DO NOT STORE ITEMS OF INTEREST Moist or damp potholders on hot surfaces TO CHILDREN AROUND OR BELOW may cause burns from steam. Do not use a THE GRILL OR IN THE CART. NEVER towel or bulky cloth in place or potholders. ALLOW CHILDREN TO CRAWL INSIDE Do not let potholders touch hot portions of OF THE CART.
PRECAUTIONS DO NOT USE BRIQUETTES OF ANY Do not use the grill for cooking KIND IN THE GRILL. excessively fatty meats or products which promote flare-ups. Do not operate the grill This stainless steel grill is designed for under unprotected combustible optimum performance without the use of construction.
ASSEMBLE INSTRUCTIONS ASSEMBLY INSTRUCTIONS PLEASE READ THE INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP. TOOLS REQUIRED: (1) PHILIPS HEAD SCREWDRIVER – NOT PROVIDED STEP 1:The screws used to attach the side shelf are already screwed into the left panel (see the figure below).
Page 8
ASSEMBLY INSTRUCTIONS STEP 2:The screws used to attach the push bar are screwed into the back of the push bar. align the holes on the front side of the side shelf, and then tighten up the screws to assemble the push bar.
Page 9
ASSEMBLY INSTRUCTIONS STEP 3:The screws used to attach the push bar are screwed into the right panel (see the figure below). align with the holes in the push bar, and then screw into the holes on the right panel of the grill.
Page 10
ASSEMBLY INSTRUCTIONS STEP4: Find the 4 screws used to attach the left and right push bar braces. Align the holes for each brace with the holes on the right panel beneath the push bar. Insert the screws and loosely attach the braces. Locate the 2 screws which will attach each brace to the push bar itself, as shown in the diagram below.
Page 11
ASSEMBLY INSTRUCTIONS STEP5: The screws for rotisserie motor are screwed into the right side of the grill housing. Remove the screws and install the rotisserie motor mount as shown in the figure below. Assemble the rotisserie skewer as shown in the figure below. 4 sets each side...
Page 12
ASSEMBLY INSTRUCTIONS STEP 6: Battery are inserted for the Rotisserie burner . To install the battery. Turn the ignition button housing counterclockwise and remove it. Replace the ignition button housings after the battery are installed.
Page 13
ASSEMBLY INSTRUCTIONS STEP 7: Your grill is ready to use!
Page 14
PROPANE TANK ASSEMBLY Attach propane gas tank to regulator inlet fitting by turning the regulator clockwise as shown in figure below. LP gas cylinder must be fitted with a listed overfill prevention device (OPD) CYLINDER TANK STRAP – MUST BE USED...
GAS HOOK-UP NEVER CONNECT AN UNREGULATED QCC1 in the standard for compressed gas GAS SUPPLY LINE TO THE APPLIANCE. cylinder valve outlet and inlet connection USE THE REGULATOR/HOSE ANSI/CGA-V-1. ASSEMBLY SUPPLIED. Manifold pressure: 10”(25.4cm) water This is a liquid propane configured grill. column (W.C.).
GAS HOOK-UP the valve, hand tighten the nut To disconnect L.P. gas cylinder: clockwise to a complete stop. Do not 1. Turn the burner valves off. use a wrench to tighten. Use of a wrench may damage the quick coupling 2.
LEAK TESTING GENERAL Substitution will void the warranty. Do not use the grill until all connections have been Although all gas connections on the grill are checked and do not leak. leak tested at the factory prior to shipment, a complete gas tightness check must be GAS FLOW CHECK performed at the installation site due to...
OPERATING INSTRUCTIONS GENERAL USE OF THE GRILL AND WARNING: IMPORTANT! ROTISSERIE USING THE SIDE BURNER: Each main burner is rated at 17,000 Inspect the gas supply hose prior to Btu/hr. The main grill burners encompass turning the gas “ON”. If there is evidence the entire cooking area and are side of cuts, wear or abrasion, it must be ported to minimize blockage from falling...
OPERATING INSTRUCTIONS then push the meat forks firmly together. CAUTION: PLEASE TAKE OFF THE Tighten the wing nuts as tight as possible. WARMING RACK WHEN USING THE ROTIS BURNER. THE HIGH HEAT It may also be necessary to wrap the food COMING FROM THE ROTIS BURNER with butchers string (never use nylon or MAY CAUSE THE WARMING RACK TO...
Page 20
GRILL LIGHTING INSTRUCTIONS TO LIGHT THE GRILL BURNER: If you’ve just attempted to light the burner with the igniter, allow 5 minutes for any Make sure all knobs are “OFF” then turn on accumulated gas to dissipate. Keep your the gas supply from the LP tank. Always face and hands as far away from the grill keep your face and body as far from the as possible.
Page 22
GRILL LIGHTING INSTRUCTIONS FLAME CHARACTERISTICS flame is noisy and tends to lift away from the burner, it indicates too much air. Check for proper burner flame characteristics. Burner flames should be blue and stable Each burner is adjusted prior to with no yellow tips, excessive noise, or shipment;...
LIGHTING ILLUSTRATION Main & Side Burner Lighting Illustration Rotisserie Burner Lighting Illustration Step 1. Make sure the Lid is open Step 1. Push and turn the rotisserie knob to ON Step 2. Push and turn one of main or side Step 2.
CARE AND MAINTENANCE STAINLESS STEEL is made to relight the grill. Frequency of cleaning will depend on how often you use The grill is made from non-rusting and the grill. non-magnetic stainless steel. There are many different stainless steel cleaners MAIN GRILL BURNER CLEANING available.
CARE AND MAINTENANCE in the direction of the grain. Do not use BURNER GRATE: steel wool as it will scratch the surface. To The top burner grate is stainless steel. To touch up noticeable scratches in the avoid burns do not clean a hot grate. They stainless steel, sand very lightly with dry may be wiped while 100 grit emery paper in the direction of the...
Page 26
TROUBLE SHOOTING CHECK LIST WHAT TO DO PROBLEMS Check to see if LP tank is empty. Grill won’t light when the control knob is rotated. Clean wire(s) and /or electrode by rubbing with alcohol and clean swab. Wipe with dry cloth. Make sure the wire is connected to electrode assembly.
Page 28
PARTS LIST DESCRIPTION Q’TY DESCRIPTION Q’TY REF# REF# Front lid Side burner Handle Gas hose connector Bowl assembly Cooking grid, side burner Front baffle Side shelf, left Valve, main burner Push bar, left Control panel Grease tray Control knob seat Service tray Control knob Push bar, right...
Different orifices must be installed when purchased. If dealer service is not converting from one type of gas to another. available, contact: Nexgrill Industries, Inc. You will also need a data plate indicating customer service 1-800-913-8999 or what type of gas is used by the grill.
GRILL COOKING CHART WEIGHT OR APPROXIMATE SPECIAL INSTRUCTIONS AND FOOD THICKNESS FLAME SIZE TIME TIPS VEGETABLES Slice.Dot with butter or margarine Wrap in heavy-duty foil.Grill,turning occasionally Fresh Beets Medium 12 to 20 minutes Carrots Grill,turning once.Brush Occasionally Turnips With melted butter or margarine Onion 1/2 inch slices Medium...
Page 31
GRILL COOKING CHART WEIGHT OR APPROXIMATE SPECIAL INSTRUCTIONS FOOD THICKNESS FLAME SIZE TIME AND TIPS Tenderloin, Porterhouse, T-Bone, Sirloin Remove excess fat from edge. Slash remaining fat at 2-inch intervals. Rare 1 inch High 8 to 14 minutes Grill, turning once. 1-1/2 inch High 11 to 18 minutes...
Page 32
GRILL COOKING CHART WEIGHT OR APPROXIMATE SPECIAL INSTRUCTIONS FLAME SIZE FOOD THICKNESS TIME AND TIPS FISH AND SEAFOOD Grill,turning once.Brush with melted butter,margarine or oil Steaks To keep moist. Halibut 3/4 to 1 inch Medium to 8 to 15 minutes Salmon High Swordfish...
GRILL RECIPE SUGGESTIONS BBQ SALMON TANGY SEAFOOD KABOBS Half hour before cooking, turn the burner to the grill on full. Drain 1 lb. Large shrimp, shelled & 2 large salmon steaks deveined seafood reserving marinade. On 2 tbs. Oil each of twelve 10” skewers, ¾...
Page 34
GRILL RECIPE SUGGESTIONS Preheat grill. Combine cheese, Pound flank steak to ¼ inch In blender, process 1/3 c. water, condensed soup, milk, BBQ thickness or flatten chicken onion, soy sauce, 2 tsp. oil and sauce, oregano, salt and pepper breasts. Mix oil, lime juice and the next 8 ingredients until in a large mixing bowl.
Page 35
GRILL RECIPE SUGGESTIONS CHICKEN TANDOORI STYLE Marinade ribs for 3 hours. Use TURKEY marinade for basting by adding 8 large chicken thighs or 12 lb. turkey drumsticks beer to it. Place pan under the Beer basting sauce: ribs and baste frequently. To 1 c.
Our obligation under this warranty is limited to repair or replacement, at our option, of the product during the warranty period. The extent of any liability of Nexgrill Industries, Inc. under this warranty is limited to repair or replacement. This warranty does not cover...
Need help?
Do you have a question about the 720-0108 and is the answer not in the manual?
Questions and answers