Using External Viewfinder (Optional) - Panasonic Lumix DMC-LX5 Operating Instructions Manual

Using External Viewfinder (optional)

When using the external viewfinder (DMW-VF1; optional), the screen for taking the
wide-angle pictures can be displayed on the viewfinder.
Preparations:
•
Turn off the camera and close the built-in flash.
•
Remove the hot shoe cover that is attached to the camera.
Insert the external viewfinder (DMW-VF1;
optional) all the way into the hot shoe A.
•
Press the lower part of the external viewfinder with
your finger, and securely insert the connector as
well.
(Do not press on the lens part)
•
When attaching the optional external viewfinder, be
sure to do so slowly and carefully.
•
When removing the external viewfinder, pull it off
slowly.
Select [OPT. VIEWFINDER] on [REC] Mode menu.
•
For more about [OPT. VIEWFINDER], refer to
Press 3/4 to select [ON] and then press [MENU/SET].
•
You can switch the LCD monitor to a blank screen by repeatedly pressing [DISPLAY].
(P64)
Note
•
The frame lines show the usable area for a 24 mm lens (35 mm film camera equivalent, aspect
ratio 3:2, Wide).
•
Frame lines is only an approximation. Check the LCD monitor for precise view.
•
When the lens surface is dirty, wipe with a soft dry cloth.
•
Turn off the camera when removing the external viewfinder.
•
The External Viewfinder cannot be used with the External Flash (DMW-FL220, DMW-FL360,
DMW-FL500; optional).
•
For details, refer to the operating instructions of the optional external viewfinder.
Others
(P11)
P149
.
- 198 -
(P28)