Add A New, Not Pre-Programmed Satellite And Run A Scan On It - Silvercrest SL 65 Operating Manual

Add a new, not pre-programmed satellite and run
a scan on it
Adding a new satellite
Press the "MENU" key.
Select the sub-menu "Add satellite" in the menu "System
installation".
Press the "OK" key.
A small menu will be displayed on the screen.
Press the "V+" key.
A small menu with satellite names will be displayed on the screen.
Select "User satellite" with the "CH
Press the "OK" key.
Press the numeric key 1 to enter a name for the "User satellite".
An editor will be displayed on the screen. It reads "User satellite".
Select the letters and numbers for the new satellite name using
the "CH " and "CH L "arrow keys and the numeric keys.
If you wish to delete an entered letter, press the "AUDIO" key.
Press the "OK" key to confirm the entry.
The editor is closed.
Press the "OK" key once again.
The message "Update successful" appears on the screen.
36
" and "CH L "arrow keys.