USER’S MANUAL Cardioid Headband 4088 40 88 Type CONTENTS Introduction Placement Cleaning Guide Correct use of the Cardioid Headband 4088 Specifications Accessories Available Service & Repair Warranty CE Standard...
In general, to ensure the optimal sound of grids to clean the diaphragm. The protec- the 4088, it must be mounted at about tion grids are not removable, therefore no Correct placement of microphone at...
To provide users with safe and compact guidelines concerning the daily use of the mounting of connectors, all Miniature microphone. Microphones from DPA are fitted with the MicroDot connector as standard. A broad Correct treatment of the microphone range of connection adapters is offered as...
Page 5
In case of failure, hooks. MicroDot spare parts tool, and assembly tool and assembly guide can be acquired. The 4088 headband is supplied with the Various wireless systems require the use of boom mounted. electronic components inside the adapter...
Page 6
Take up the 4088 and adjust the size of the If you want the position of the microphone headband so that it fits the size of your boom to be altered at this point, adjustments head: Start with mounting an oversized...
30-40 Ohm Pressure gradient Cable drive capability: Power supply: Up to 300m (984ft) Min 5V – max 50V through the adapter sys- Typical on-axis frequency response of Cardioid Headband 4088 Microphone length: tem from DPA Microphones 11mm (0.5in) 0° Frequency range: Microphone diameter: 5.5mm (0.25in)
SERVICE & REPAIR WARRANTY Products from DPA Microphones are All products from DPA Microphones are extremely stable, and there should not be covered by a two-year limited warranty on any significant change in the specifications both mechanical functionality and docu- with time and use.
Need help?
Do you have a question about the 4088 and is the answer not in the manual?
Questions and answers