Advertisement
Quick Links
FLAT PANEL TV
WALL MOUNT
Model
INsTrUcTIONs ANd PrEcAUTIONs
Visit our website at: http://www.harborfreight.com
sAVE ThEsE
INsTrUcTIONs.
rEAd ALL
PrEcAUTIONs ANd
INsTrUcTIONs.
©
Copyright
2010 by Harbor Freight Tools
reserved. No portion of this document or any artwork
contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight
Tools. Diagrams within this document may not be drawn
proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
For technical questions or replacement parts,
please call 1-800-444-3353.
67781
®
. All rights
sPEcIFIcATIONs
Weight Capacity
For LED / LCD / Plasma TVs 37" to 61" wide
UNPAckINg
When unpacking, make sure that the item is
intact and undamaged. If any parts are missing or
broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
IMPOrTANT sAFETY INFOrMATION
1.
Do not exceed 150 lb. max. weight capacity of
TV Bracket. Sudden load movement may briefly
create excess load causing product failure.
2.
Do not mount TV Bracket to hollow wall, gypsum
board, or similar material that will not support the
weight of the TV. Mount only to 2" x 4" wood stud
or concrete/brick walls that can safely support
combined weight of Bracket, TV and all attached
hardware and components.
3.
If you are unsure wall is strong enough to
support weight of TV and TV Bracket, contact a
professional installer to reinforce wall.
4.
Do not mount overhead.
5.
Assemble and install only according to these
instructions. Improper assembly and installation
can create hazards and lead to personal injury
and property damage.
6.
Verify that mounting surface has no hidden utility
lines before drilling or driving screws.
7.
Wear ANSI-approved safety goggles and heavy-
duty work gloves during installation.
8.
Inspect before installing; do not mount to wall if
parts are missing, loose or damaged.
9.
Use as intended only. Do not use TV Bracket for
any purpose for which it was not designed.
10.
Keep installation area clean and well lit.
11.
Do not assemble or install when tired or when
under the influence of drugs or medication.
12.
This product is not a toy. Do not allow children to
play with or near this item.
13.
Maintain product labels and nameplates. These
carry important safety information. If unreadable
or missing, contact Harbor Freight Tools for a
replacement.
150 lb.
Advertisement
Summary of Contents for Harbor Freight Tools 67781
-
Page 1: Specifications
This product is not a toy. Do not allow children to play with or near this item. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. sPEcIFIcATIONs 150 lb. - Page 2 WArNINg! Wall Anchors must be set firmly against concrete or masonry. If mounting to SKU 67781 For technical questions, please call 1-800-444-3353. a masonry wall covered with drywall/plaster, counter bore a hole through drywall/plaster around mounting holes’...
- Page 3 Cross Bars and that TV is centered. See Figure 5. Cross Bars Figure 5 SKU 67781 For technical questions, please call 1-800-444-3353. Tighten the two clamping screws leaving about an eight of an inch space. See Figure 6.
- Page 4 AND NOT By THE BUyEr. THE BUyEr ASSUMES ALL rISK AND LIABILITy ArISINg OUT OF HIS Or HEr rEPAIrS TO THE OrIgINAL PrODUCT Or rEPLACEMENT PArTS THErETO, Or ArISINg OUT OF HIS Or HEr INSTALLATION OF rEPLACEMENT PArTS THErETO. SKU 67781 For technical questions, please call 1-800-444-3353. Part...
Need help?
Do you have a question about the 67781 and is the answer not in the manual?
Questions and answers