Connecting Ps/2 Devices; Connecting Usb Devices - Medion PC Manual

Connecting PS/2 Devices

Diagram reference: O, R
You can omit this step if you want to connect a USB mouse or a USB keyboard.
1. Connect the mouse cable to the right, green PS/2 port.
2. Connect the keyboard to the left, blue PS/2 port.

Connecting USB Devices

Diagram reference: E
Warning!
Connect your USB devices after initial set-up of your new PC. This will
prevent unnecessary confusion during installation. These devices can gener-
ally be connected during operation. Read the manual for your peripheral
device first.
•
The voltage outputs of your PC for USB are protected by a fuse (limited power
source according to EN60950). This ensures that a malfunction of the PC will not
damage the peripheral devices connected to the respective jacks.
You have a choice of several connection sockets. It does not matter which you use.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. If you wish to use a printer, scanner or other device with a USB port, connect the
cable to the USB socket on your PC.
Note
Connect your devices always to the same port otherwise your operating sys-
tem will give a new ID and asks for driver installation.
- 14 -