Connecting Speakers/Audio Output; Pcs With Surround Sound - Medion PC Manual

Connecting Speakers/Audio Output

Diagram reference: H
Here you can connect your active speakers for replaying or audio connection
cables for recording. Please refer to the user's guide of your stereo installation for
information about which connector you should use (usually Line In or Aux).
1. Connect the cable with the 3.5 mm stereo jack plug into the green socket
( )
( )
( )
on the rear of your PC.

PCs with Surround Sound

Diagram reference: H
Connect your surround equipment as follows:
1. Connect the front speaker to the green socket marked
2. Attach the rear loudspeakers to the connector RS OUT.
3. Your centre speaker or subwoofer can be connected to the socket
CS OUT.
4. Connect to the SS OUT socket two more speakers for the back surround.
A digital audio output (SPDIF) can be connected to an optical and/or a coaxial
cable.
Diagram reference: L1, L2
1. Plug an optical cable to the socket at position L1 or a cinch cable at position
L2.
2. Connect the other end of the cable to an audio device with a corresponding
digital input.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
- 14 -
( )
( )
( )
.