Manual Code Search - Medion 83388 Manual

7. Use the number keys to select the preferred code from the
code list. After you enter the fourth digit, the confirmation
SUCCESS
message
The remote control returns to normal operation.
If an incorrect code is entered, the error message
appears. – The universal remote control then switches to normal
operation.

Manual code search

You can use the manual code search to find all of a device's codes, including those that
are not shown in the code list.
1. Switch on the device to be controlled.
2. Keep the Setup key pressed down for approx. 3 seconds,
CODE SETUP
until
LIST CODES
3. Press OK.
4. Use the arrows
menu.
MODE KEY
5. Press OK" The
6. Press the required mode key (TV, VCR, DVD, CD, ASAT, CBL,
AUX, DSAT). The
7. Use the arrows to select
programmed on this mode key. (If you select "
possible to select a device type because only TV codes can be programmed on the TV
mode key.)
Please refer to the list and table above.
SEARCH KEY
8. Press OK. The
9. Perform the function test now by pressing the PROG+,
or PLAY (VCR only) keys (up to 350 times) until the device
changes channels, switches off or responds accordingly.
The code search begins with the code that is currently
stored. While the search is running, the word
device type) is displayed.
If you miss the code, you can go back step by step with the PROG– key.
10. When the device responds accordingly each time a key is
pressed, press OK to save the code. The
confirmation message appears.
The remote control returns to normal operation.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 83388
is displayed.
appears.
now appears in the display.
(press twice) to select the
display appears.
DEVICE TV
display appears.
the device type to be
display appears.
CODE ERROR
SEARCH CODES
TV
" it is not
SEARCHING
(along with the selected
SUCCESS
13