Time/Charge; Charges; Charge Setup - Siemens S35i User Manual

You can display the charge details
and duration of calls as you speak,
as well as setting a unit limit for out-
going calls
Î
then select a function:
###########
###########

Charges

Charges Charges Charges
When you have adjusted the set-
tings (see below) you can display
the details of the following calls:
###########
###########
Scroll and select the re-
quired call.
Display the data.
After the data has been displayed,
you can:
Clear the display.
If a restriction exists
(see right) then the
remaining credit or time is
displayed.

Charge Setup

Charge Setup
Charge Setup Charge Setup
Currency Currency
Currency Currency
Enter the currency in which charge
details are to be shown.

Time/Charge

Time/Charge Time/Charge Time/Charge
,
D
AdviceOf Charge AdviceOf Charge AdviceOf Charge AdviceOf Charge
If your network supports charge
detail display, then the current units
are shown.
If you have set the charge per unit,
then the costs incurred are
displayed.
It may be necessary to register
separately for this service.
Personal Rate Personal Rate Personal Rate Personal Rate
Enter the charges per unit/period.
Charge Limit Charge Limit
Charge Limit Charge Limit
Special SIM cards allow you or the
service provider to define credit/
period after which the phone is
blocked for outgoing calls (PIN2
required).
Press.
-
Enter the number of units.
/
Then confirm the credit or reset the
counter.
Combined In/Out Combined In/Out Combined In/Out Combined In/Out
Display the call time/charge details
for all calls.
Charge Incoming Charge Incoming
Charge Incoming Charge Incoming
Display the charge details for in-
coming calls if these are billed sepa-
rately.
Auto Display Auto Display
Auto Display Auto Display
The length of call and charge details
are displayed after every call.
53
D
D