Page 3
8) Large brush • If it is necessary to replace the power supply ca- 8A) Lever-type clasps ble, please refer to the nearest Polti authorised 8B) Cloth for large brush service centre, since the use of a special tool is 9) Funnel necessary.
Page 4
• In order to avoid prejudicing the safety of the ap- pliance, use only original spare parts and acces- Polti declines liability for any damage or acci- sories approved by the manufacturer. dent derived from any use of Vaporetto which is •...
Page 5
VAPORETTO POCKET (13) into the two eyelets (G) (Fig.3). Once the adapter is secured in place, block the ac- 4. Open the door of the one-piece socket (E); in- cessory and lock it by turning it in the direction of sert the moulded plug (3) until a click is heard the arrow on it (Fig.7).
Page 6
VAPORETTO POCKET • When cleaning glass surfaces in particularly low moving the brush to and fro and laterally without temperatures preheat the glass holding the hand concentrating for a long time in the same place. The gun at minimum 50cm distance from the surface treatment can be repeated as frequently as you wi- to be cleaned.
Page 7
VAPORETTO POCKET LANCE (6) To connect the lance to the sheath or to the exten- One of the great advantages of this device is that it sion tubes, the adapter for connecting small acces- can be carried anywhere, thanks to the handle (H) sories (5) must be fitted first, after which the acces- or the shoulder strap (13).
Need help?
Do you have a question about the VAPORETTO POCKET and is the answer not in the manual?
Questions and answers