Programming The Sound Bar - Vizio S5430w-C2 Quick Start Manual

PROGRAMMING THE SOUND BAR

You can program your Sound Bar to accept TV remote IR commands. Press the MENU button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function LED Behavior
Learn Volume
(Waiting to learn)
Down
Flash from
Learn Vol -
Left to Right
continuously.
Learn Volume
Up
Learn Vol +
All of the LEDs
will blink twice to
Learn Mute
Learn Mute
When programming your
Sound Bar, turn off your TV
speakers.
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume
Down button on the TV remote control. All of the LED Indicators
on the Sound Bar will flash two times indicating that it has
successfully recognized the TV remote.
and back
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Volume Up
button on the TV remote control. All of the LED Indicators on the
Sound Bar will flash two times indicating that it has successfully
recognized the TV remote.
Press the Play button to put the Sound Bar into learning mode.
While the Sound Bar is in learning mode, press the Mute button
confirm.
on the TV remote control. All of the LED Indicators on the Sound
Bar will flash two times indicating that it has successfully
recognized the TV remote.
Description
V IZIO
TV Remote
INPUT MENU
16
Ensure that both the Sound
Bar and TV remotes are
pointed at the front of the
Sound Bar.