Related Manuals for Polaris NRX-5
Summary of Contents for Polaris NRX-5
-
Page 1: User Guide
9021NRX5.qxd 8/12/2003 2:04 PM Page 1 Business Telephone Range User Guide NRX-5 The display feature telephone for the corporate user Telephones of Distinction... - Page 2 9021NRX5.qxd 8/12/2003 2:04 PM Page 2 NRX-5 - Telephone Layout NRX-3 - Display Feature Phone Message Waiting/ Ring Indicator Wall Mount Tab Delete Button Cancel Button Select Button Menu Scroll Buttons DELETE CANCEL SELECT Memory Buttons Number Keypad New Call LED...
-
Page 3: Installation
Connect the AC adaptor into a standard 220-240VAC mains socket and the power socket at the back of the NRX-5. The New Call LED will light for about 1 second and the display will show 00-00-00. - Page 4 SELECT button to confirm your selection. The stanormally 100ms. The standard setting for Australia is normally 100ms. NOTE: By default your NRX-5 is factory set at TBR 100ms. 1.2.5 Set LCD Contrast Scroll to 'LCD CONTRAST' on the System Menu and then press the SELECT button.
-
Page 5: Operation
8/12/2003 2:04 PM Page 5 NRX-5 - Display Feature Phone 1.2.7 Set Dial Mode Scroll to 'DIAL MODE' on the System Menu and then press the SELECT button. Use the scroll buttons to select either Tone or Pulse dialling and then press the SELECT button. -
Page 6: Speakerphone Mode
2.3 Telephone Ringer The ringer volume and pitch can be adjusted via the two slide switches on the right side of the NRX-5 The ringer volume can be set to Off, Low or High levels depending on the position of the switch. There is an LED ring indicator inside the red lens. This indicator is independent of the ringer volume switch position. - Page 7 2.5 Phonebook The NRX-5 can store up to 200 of your frequently used names and numbers. To add a contact in the Phone Book: 1. Press MENU button once and the display will show PHONE BOOK XX, where XX denotes the number of phone book records stored.
- Page 8 To make use of these features, you must first subscribe to Caller ID Service. 2.6.1 99 Caller ID records When you use this telephone with the Caller ID service, the NRX-5 enables you to see the number of the calling party (unless the call is blocked or is from a silent number) when the phone rings.
-
Page 9: Deleting A Call From The Call History
SPEAKER/HEADSET button, then press the REDIAL/PAUSE button. The telephone will automatically redial the last number dialled. Alternatively, press the REDIAL/PAUSE button while the NRX-5 is at off-line, the display will show the last dialled number and its call duration. Pick up the handset or press the SPEAKER/HEADSET button, the telephone will automatically dial the last number dialled. - Page 10 LCD to indicate a 2 second pause in the dialling sequence. 2.10 Recall Facility The NRX-5 has a Recall facility which is used to access network/PBX services. To use this facility pick up the handset or press the SPEAKER/HEADSET button then press the RECALL button.
-
Page 11: Wall-Mounting The Unit
NRX-3 - Display Feature Phone NRX-5 - Display Feature Phone 3. WALL-MOUNTING THE UNIT The NRX-5 can be wall mounted using the wall mount bracket installed on the bottom of the unit. 3.1 -Dismount the wall mount bracket from the unit. - Page 12 9021NRX5.qxd 8/12/2003 2:05 PM Page 12 Polaris Communications Pty Ltd 393 Flemington Road, North Melbourne, Victoria 3051 Sales & Service: 1-800 078 036 Fax: 1-800 079 036 Email: sales@polaris.com.au Web: www.polaris.com.au Polaris Communications Pty Ltd ACN: 006 102 601...