Samsung RCD-Y95 Instruction Manual page 25

4
Set the timer switch-off time.
a Set the hour by pressing
b Press the PROGRAM button.
Result: The minutes flash.
c Set the minutes by pressing
d Press the PROGRAM button.
Result: Result: VOL 15 is displayed, where 15
corresponds to the volume already set.
5
Turn the TUNING/MODE to adjust the volume
level and press the PROGRAM button.
6
Turn the TUNING/MODE to select the desired function
FM : Select one from the 15 channels that have been programmed.
AM : Select one from the 15 channels that have been programmed.
TAPE : Insert the desired cassette tape.
CD : Insert the desired CD-ROM.
7
Press the PROGRAM button to confirm the timer.
8
Press the STANDBY/ON button to set the system to standby mode.
Timer On/Off Function
Each time the TIMER ON/OFF button is pressed, "
and the function is turned on and off.
Use this to operate or cancel the timer function.
This function is available only on the remote control.
or button.
or button.
" appears on the display
24
PROGRAM
TUNING
/MODE
PROGRAM
GB