Intercom - Panasonic KX-TG8280FX Operating Instructions Manual

TG8280FX(e).book Page 44 Tuesday, September 11, 2007 1:52 PM
Multi-unit Operation
L The handset does not beep when
cancelling its own registration.
6
{ih}
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Consult your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1
" (middle soft key) i L i
#
2
{^}/{V}: "Other Options" i
#
3
{^}/{V}: "Repeater Mode" i
#
4
{^}/{V}: "On" or "Off" i #
i {ih}
Note:
L After turning repeater mode on or off,
certain icons displayed on the base
unit will disappear for a moment and
w will flash on the handset
momentarily. This is normal. The
handset can be used once w stops
flashing.

Intercom

Intercom calls can be made:
– between a handset and the base unit
– between handsets
44
Note:
L You can locate a misplaced handset
by paging it (handset locator).
Making an intercom call
Handset
1
{INT}
2
To page the base unit, press {0}.
To page another handset, enter its
extension number ({1} – {6}).
L To stop paging, press {ih}.
3
When you finish talking, press
{ih}.
Base unit
1
{INTERCOM}
L When only 1 handset is
registered, the base unit pages
the handset automatically.
2
To page a specific handset, enter its
extension number ({1} – {6}).
To page all handsets, press {0}.
L To stop paging, press
{INTERCOM}.
L When you page all handsets, only
the handset user who answers
first can take the intercom call.
3
When you finish talking, press
{SP-PHONE}.
Note:
L When more than 2 handsets are
registered, the base unit pages all
handsets a few seconds after
pressing {INTERCOM} in step 1.
Answering an intercom call
Handset
1
Press {C} to answer the page.
2
When you finish talking, press
{ih}.