Table of Contents
Advertisement
Quick Links
HIGH-VOLUME 12VDC
AIR COMPRESSOR
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10e
Model
66399
®
. All rights reserved. No portion of this manual or any artwork
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools Central Pneumatic 66399
Summary of Contents for Harbor Freight Tools Central Pneumatic 66399
-
Page 1: Air Compressor
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. -
Page 2: Important Safety Instructions
Keep bystanders, children, and visi- tors away while operating the tool. Distractions are able to result in the loss of control of the tool. Personal safety Stay alert. Watch what you are doing and use common sense when operat- SKU 66399... - Page 3 Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users. SKU 66399 For technical questions, please call 1-800-444-3353. Maintain the tool with care. Check for misalignment or binding...
-
Page 4: Symbols And Specific Safety Instructions
Other accessories not designed for the forces generated may break and forcefully launch pieces. Attach all accessories properly to the tool before connecting the air supply. A loose accessory may detach or break during operation. SKU 66399... -
Page 5: Specifications
0-115 Maximum Power 12VDC, 30 AMPS Do not add oil or any Permanently Lubricated other lubricant SKU 66399 For technical questions, please call 1-800-444-3353. INITIAL TOOL SET UP/ ASSEMBLY Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this... -
Page 6: Operating Instructions
Note: The power source must not ex- ceed 12V. WARNING! Failure to follow the fol- lowing steps can lead to a blown fuse. Be sure the valve stem is clean and free of dirt. REV 10a SKU 66399... - Page 7 Monitor the Pressure Gauge carefully to avoid over-inflating the item. (See Fig. 3, above.) REV 09f, 09h; 10a; 10d, 10e SKU 66399 For technical questions, please call 1-800-444-3353. 12. Continue inflating until the recommended pressure is reached. 13. Stop the compressor by clicking the On/ Off Switch to its “OFF”...
-
Page 8: User Maintenance Instructions
Check the hoses to be sure there are no cracks or worn areas. Rotate Filter counterclockwise and remove from the compressor. Gently pry the cover from the threaded end. Remove the filter, wash in warm water REV 10a SKU 66399... -
Page 9: Troubleshooting
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect from inflated item before service. REV 10d SKU 66399 For technical questions, please call 1-800-444-3353. b. Put a drop or two of machine oil on the c. Slide the Front Cover back on and se-... -
Page 10: Parts List
Inflator Nozzle 1 Inflator Nozzle 2 Needle Nozzle Accessory List Part Description Inflator Nozzle 1 Inflator Nozzle 2 Needle Nozzle Fuse, Blade Type Description Qty. Function Medium size fill orifice Small size fill orifice Inflate balls Overload Protection REV 10a SKU 66399... -
Page 11: Assembly Diagram
ASSEMBLY DIAGRAM SKU 66399 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Please Read The Following Carefully
90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This...
Need help?
Do you have a question about the Central Pneumatic 66399 and is the answer not in the manual?
Questions and answers