Ending Recordings - Silvercrest DA-16R Manual

Note:
To achieve the best possible recording result, direct the microphone input
towards the source at a distance of approx. 10 – 15 cm and avoid interfering
sounds.
14.2

Ending recordings

To end the recording, press the
and the recorded file will automatically be saved in the "Voice" folder. The saved
file automatically receives the name "VXXX.WAV", where XXX corresponds to a
numerical sequence that begins with 001. For example, if you have already re-
corded six WAV files, the next recorded file will be stored under "V007.WAV" in the
"Voice" folder. If you have deleted other WAV files in the meantime (e.g.
"V003.WAV"), then the file is always stored at the lowest available position, which
in this case means under "V003.WAV".
You can exit the voice mode by pressing the M button
Note:
The recording can only be carried out in wav format. The mp3 format is not
supported.
The recordings can be deleted under the menu item "Delete" on page 27 .
If the battery display only shows two lines, no voice recording can be started.
If a recording is attempted, the message "Battery too low" appears and the
recording is terminated.
20
function button . This will stop the recording
.