Silvercrest CRB-631 User Manual page 26

CRB-631 - Basic functions
Alphabetical search (Track name)
If the alphabetic search function is selected, the three characters "A**- - - - -" are shown
on the display.
Plus (+) button / minus (-) button (9)
Tune up button (
►►▌
button ( )(11)
▌◄◄
Select button (SEL) (15)
Band button (24)
Note:
 Characters from "A" to "Z" and the digits "0" to "9" can be entered.
 Repeat this procedure until the required characters are displayed.
 If several files are found, the files can be opened by pressing the Tune up
(►►▌) (13) or Tune down buttons (▌◄◄)(11) and the desired track can be
confirmed by pressing the select button (SEL) (15) .
 If the track is not found, the message "NO MATCH" is displayed, followed by "A
* * - - - - -" . The alphabetical search can then be repeated.
Folder search (only in MP3/SD/USB mode)
When the folder search is selected, "ROOT" is shown on the display.
Tune up button (
►►▌
button ( )(11)
▌◄◄
Band button (24)
Note:
 If no entries are made for 5 seconds, the display returns to the default setting in
the selected mode. If the clock display is enabled, the device displays the clock
in standby mode.
26
) (13) / Tune down
) (13) / Tune down
Enter the character.
Select the next or previous character.
The flashing character is confirmed.
Press the Band button twice. Playback
of the entered track is started.
You can navigate through sub-folders if
these are available.
Open the sub-folder or confirm playback
of the first file of the selected folder.
The device then starts playback of the
track of the selected (sub)folder.