Programme Favourite Tracks (Audio Cds Only); Modifying The Programme; Exit The Programme Mode Temporarily; Reviewing The Programme - Philips DVD System Owner's Manual

Programme favourite tracks
(Audio CDs only)
You can programme up to 32 tracks for playback in any
desired order. This function only operates with audio
CDs (not DVDs/VCDs).
1
Load the desired discs on the disc trays (refer to "Basic
playback").
2
Press PROGRAM.
"PROG" icon lights up.
3
Press DISC SKIP (or DVD/CD) repeatedly to select the
desired disc (if necessary).
The disc number appears.
4
Use the numeric keypad (0-9) to input the track
number.
If you attempt to programme more than 32 tracks,
"P-FULL" is displayed.
5
Press OK on the remote control to store the track.
Repeat steps 3-5 to store other tracks.
6 To end programming, press Ç once.
"PROG" icon stays and the programme mode remains
active.
To start programme play, press £ (É Å ).
7

Modifying the programme

1
Stop playback, then press Ç again.
Press 3 or 4 repeatedly to select the desired
2
programmed track.
To clear the track
3
Press and hold Ç.
To change the track under another track number
3
Use the numeric keypad (0-9) to enter the desired
track number, then press OK.
To change the track
3
Press DISC SKIP (or DVD/CD) repeatedly to select the
desired disc, then use the numeric keypad (0-9) to input
a new track number and press OK.
To add a track
Press 3 repeatedly until you reach the empty programmed
3
track, then use the numeric keypad (0-9) to enter the
number of the desired track and press OK.
Notes:
– You cannot modify the programming in Resume mode.
– The programmed contents are lost if you turn off the DVD
system or change the function to TUNER.

Exit the programme mode temporarily

In stop mode, press Ç and followed by PROGRAM.
"P-OFF" appears.
To return to the programming mode, press PROGRAM
again.

Reviewing the programme

Stop playback , then press 3 or 4 repeatedly.
To exit review mode, press Ç.

Clearing the entire programme

Stop playback, then press Ç twice.
"P-CLEAR" appears.

Special VCD features

Playback Control (PBC)

PBC playback allows you to play Video CDs interactively,
following the menu on the display.
Press TITLE on the remote control to switch on/off the
PBC mode.
When playing a disc with PBC function
If "PBC OFF", the system will start playback automatically.
If "PBC ON", the PBC menu (if available) will appear on the
TV screen for selection. Use the numeric keypad (0-9)
to enter your choice.
Note:
– If PBC mode is switched on, REPEAT functions are not
available.
O
19
PERATIONS