Maintenance Schedule - Makita G2800R Instructions For Use Manual

8. MAINTENANCE SCHEDULE

MAINTENANCE, REPLACEMENT OR REPAIR OF THE EMISSION CONTROL DEVICES
AND SYSTEMS MAY BE PERFORMED BY ANY NONROAD ENGINE REPAIR ESTAB-
LISHMENT OR INDIVIDUAL.
DAILY INSPECTION
Before running the generator, check the following service items:
PERIODIC MAINTENANCE
Periodic maintenance is vital to safe and efficient operation of your generator.
Check the table below for periodic maintenance intervals.
IT IS ALSO NECESSARY FOR THE USER OF THIS GENERATOR TO
CONDUCT THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION-
RELATED PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL
SYSTEM EFFECTIVE.
The emission control system consists of the following parts:
(1) Carburetor and internal
parts
(2) Cold start enrichment
system, if applicable
(3) Intake manifold, if
applicable
The maintenance schedule indicated in the following table is based on the normal
engine operation. Should the engine be operated in extremely dusty condition or in
heavier loading condition, the maintenance intervals must be shortened depending
on the contamination of oil, clogging of filter elements, wear of parts, and so on.
Enough gasoline
Excessive vibration,noise
Safe surroundings
Clean air cleaner element
Leakage of gasoline and engine oil
Enough clean engine oil
Loose or broken bolts and nuts
(4) Air cleaner elements
(5) Spark plug
(6) Magneto or electronic
ignition system
(7) Spark advance/retard
system, if applicable
26
(8) Exhaust manifold, if
applicable
(9) Hoses, belts, connec-
tors, and assemblies