Changing The Start Time Or The Station Of A File - Panasonic UF-6300 Operating Instructions Manual

Changing the Start Time or the Station of a File

To change the start time and/or stations in a communication file, follow the steps below.
1
2
2
3
Enter the file number or use
that you want to change.
Ex:
0 0 1
4
5
Enter a new start time.
Ex: 0 6 0 0
(If you do not have to change the time, skip to step 6.)
6
7
To delete the station(s), press
station you want to delete appears. Then press
or
Enter the station(s) you want to add.
8
1. Your machine cannot change the start time and/or stations in the file while stored document is
NOTE
being sent or the machine is waiting to redial.
2. If the file is not a Deferred Communication File, the following message is shown in the display.
SET DEFERRED COMM.?
1:YES 2:NO
Press
9
or
(See Note 2)
(6:00 a.m.)
or
1
to change the type of the file for deferred communication file.
EDIT FILE MODE (1-6)
ENTER NO. OR
ENTER FILE NO.OR
ENTER FILE NO.OR
to select the file
DEFERRED XMT
START TIME
DEFERRED XMT
START TIME
<01>(Station name)
5551234
ENTER STATION(S)
key until the
THEN PRESS START
Clear .
ADD MORE OR START
* STORE *
Edit File Mode
∨ ∧
∨ ∧
FILE NO.=
∨ ∧
FILE NO.=001
22:30
06:00
1 STN(S) ARE SET
NO.005
89