Appendix D ─ Troubleshooting - Mitsubishi Electric DX-TL16U User Manual

Hide thumbs Also See for DX-TL16U:
Table of Contents

Advertisement

Appendix D ─ Troubleshooting
Problem
No Power
No Live Video
Live Video Very Bright
No Live Video on the VGA
Monitor
DVR has stopped recording
The icon
displays, however,
the DVR is not recording.
 Check power cord connections.
 Confirm that there is power at the outlet.
 Check camera video cable and connections.
 Check monitor video cable and connections.
 Confirm that the camera has power.
 Check camera lens settings.
If a cable is attached to the "Loop" connector, make certain it is connected
to a properly terminated device.
If the DVR does not detect a VGA monitor automatically, press and hold
the
button on the front panel for 5 seconds or longer to switch the
Panic
video output from Video out to VGA out.
If hard disk drive is full, you will either need to delete video or set the
DVR to the Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
display when there is no event, and the DVR is not recording. The
red
and
display when any event occurs and the DVR starts recording.
Possible Solution
Digital Video Recorder
and
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-tl8u

Table of Contents