Changing The Door Hinging - Miele KD 1211 S Operating And Installation Instructions

Changing the door hinging

The appliance is supplied right hand
hinged. If left hand door hinging is
required follow the instructions below.
It is essential that the changing of
the door hinging is carried out by
two people.
^ Open the lower door.
11
^ Remove lower cover a and unscrew
the screw for ventilation grille b.
^ Unscrew lower door bearing c and
remove ventilation grille b.
^ Remove the lower door.
^ Remove bearing bush d from hinge
pin e.
^ Unscrew hinge pin e.
^ Refit hinge pin e in the neighbouring
hole of lower door bearing c and fit
bearing bush d onto hinge pin e.
34
^ Unscrew middle door bearing f, and
lift off the upper door.
^ Take care not to lose bearing bushes
g.
^ Remove covers h and refit on the
opposite side.
^ Remove cover i from upper door
bearing j.
^ Unscrew upper door bearing j.
^ Remove cover k and refit on the
opposite side.