Dynamic Cooling M - Miele KTN 4352 SD ed Operating And Installation Instructions

Frost free fridge freezer with dynamic cooling
Table of Contents

Advertisement

Switching off Super freeze
The Super freeze function will switch off
automatically after approx. 65 hours.
The indicator light will go out and the
appliance will continue running at
normal power.
To save energy the Super freeze
function can be switched off once a
constant temperature of -18 °C or
colder has been reached in the freezer.
^ Press the Super freeze button. The
Super freeze indicator light will go
out, and the appliance will continue
to operate at normal power.
Using Super freeze and Dynamic cooling

Dynamic cooling m

When the Dynamic cooling function is
not switched on, the natural circulation
of air in the appliance will cause
different temperature zones in the
refrigerator as the cold, heavy air will
sink to the lowest section of the
appliance. You should bear this in mind
when placing food in the appliance
(see "Using the refrigerator efficiently").
However, if you are placing a large
amount of food in the refrigerator at any
one time, it is a good idea to switch on
Dynamic cooling. This way you can
distribute the temperature inside the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature is set as normal with
the temperature control.
Dynamic cooling should also be
selected when:
– the ambient temperature in the room
is high (above approx. 30 °C), and
– the room humidity level is high.
Switching on Dynamic cooling
^ Press the switch for Dynamic cooling
above the fan to m.
The fan will now operate when the
compressor is running.
Switching off Dynamic cooling
^ Press the switch for Dynamic cooling
to "0".
The fan will no longer operate when the
compressor is running.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents