Parts Identification Cutting surface Cutting surface should be faced to Cutting plate when being set, otherwise meat will not be ground. Switch Locking knob Motor housing Opening Food pusher Hopper plate Head Feed screw Cutting blade j ~ l j ~ l Attachments j ~ l Cutting plate (fine)
Panasonic dealer or its service agent. (If it is not fitted properly, meat will not be ground.) • Never remove or attach the hopper plate, the head or Place the desired cutting plate next to the cutting cap when the motor is operating.
Page 8
How to Clean (Grinding Meat) Cut all foods into pieces so that they fit easily into (Disassembling) the hopper opening. Make sure that the motor has stopped completely. Plug in, then switch on. Disconnect the plug from the power outlet. Disassemble by reversing the steps from 5 - 1 .
Specifications 50 60 38.6 16.6 34.2 50 60 38.6 16.6 34.2 Power supply 230 V 50 - 60 Hz. Dimensions (H X W X D) 38.6 X 16.6 X 34.2 cm Weight Attachments Cutting plates – 8 –...
Page 10
Matsushita Electric Industrial Co., Ltd. Osaka, Japan W eb Site: http://www.panasonic.co.jp/global/ MZ50K1181 Printed in Japan M0902T1063...