Connecting Directly With A Smartphone; Installing Image App; Connecting This Unit With A Smartphone - Panasonic HX-A100 Basic Operating Instructions Manual

Connecting directly with a smartphone

Installing Image App

The Image App is an application for the smartphone provided by Panasonic.
Required Operating Systems for Image App
The following Operating Systems of the smartphone are supported.
TM
Android device:
iOS device:
≥ The service may not be able to be used properly depending on the type of smartphone being
used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/e_cam/index.html (This Site is English only.)
1
Connect your device (Android or iOS) to a network.
2
Android device: Select "Play Store"
iOS device: Select "App Store
3
Enter "Panasonic Image App" into the search box.
4
Select "Image App" and install it.
≥ The icon will be added to the menu.

Connecting this unit with a smartphone

Connecting with a WPS-compatible smartphone
Please read the manual of your smartphone and check if the smartphone is compatible with WPS*.
≥ If your smartphone is not compatible with WPS, connect this unit with the smartphone according
to "Selecting SSID of this unit to connect with a smartphone". (l 20)
* WPS stands for "Wi-Fi Protected Setup
1
Press the Wi-Fi/WPS button continuously to
change the Wi-Fi mode lamp to [
≥ The Wi-Fi mode lamp [
2
Set the Wi-Fi function to ON on the smartphone
setup menu.
≥ Refer to the manual of your smartphone.
3
Press and hold the Wi-Fi/WPS button for 3 seconds or more.
≥ The Wi-Fi mode lamp [
4
Select the connection using the WPS button (or WPS function) in the
Wi-Fi settings of the smartphone within 3 minutes.
≥ Wi-Fi mode lamp [
Android 2.2 to Android 4.2
iOS 4.3 to iOS 6.0
TM
".
] flashes.
] flashes faster.
] will turn on when the connection is completed.
.
SM
".
].
19
VQT4X90