Kenwood BL650 series Instructions

G
Use your blender for soups, This appliance is not intended for
sauces, drinks, pâtés, use by persons (including children)
mayonnaise, dressings etc. with reduced physical, sensory or
mental capabilities, or lack of
before using your Kenwood
experience and knowledge, unless
appliance
they have been given supervision
G
Read these instructions carefully
or instruction concerning use of
and retain for future reference.
the appliance by a person
G
Remove all packaging and any
responsible for their safety.
labels.
G
Children should be supervised to
safety
ensure that they do not play with
the appliance.
G
Allow all liquids to cool to room G
Only use the appliance for its
temperature before placing them
intended domestic use. Kenwood will
in the blender.
not accept any liability if the appliance
G
Switch off and unplug:
is subject to improper use, or failure
G G before fitting or removing parts
to comply with these instructions.
after use
G G
before plugging in
G G before cleaning.
Make sure your electricity supply is
G
Keep hands and utensils out of the
the same as the one shown on the
blender when it's on the power
underside of the machine.
unit.
G Important – UK only
Don't touch the sharp blades.
G
Never let the power unit, cord or
G
The wires in the cord are coloured
plug get wet.
as follows:
G
Never use a damaged machine.
Blue = Neutral,
Get it checked or repaired: see
Brown = Live.
'service'.
G
The appliance must be protected
G
Never use an unauthorised
by a 3A approved (BS1362) fuse.
attachment.
Note:
G
Never leave the machine on
G
For non-rewireable plugs the fuse
unattended.
cover MUST be refitted when
G
When removing the blender from
replacing the fuse. If the fuse cover
the power unit:
is lost then the plug must not be
wait until the blades have
G G
used until a replacement can be
completely stopped;
obtained. The correct fuse cover is
G G don't accidentally unscrew the
identified by colour and a
goblet from the blade unit.
replacement may be obtained
G
Never run the blender empty.
from your Kenwood Authorised
G
Always unplug your blender
Repairer (see Service).
when not in use.
G
If a non-rewireable plug is cut off it
G
Only operate the blender with the
must be DESTROYED
lid in place.
IMMEDIATELY. An electric shock
G
Important - The skirt on the
hazard may arise if an unwanted
base of the goblet is fitted during
non-rewireable plug is
manufacture and no attempt
inadvertently inserted into a 13A
should be made to remove it.
socket outlet.
G
This machine complies with
European Economic Community
Directive 89/336/EEC.
before using for the first 6 Place the blender onto the power
time unit and turn clockwise to lock
7 Select the required program or
1 Wash the parts: see 'cleaning'.
speed and the button will light up.
key
Choose from the following options:
G
Select one of the 5 pre-
blender
programmed buttons. The blender
blade unit
will switch off automatically at the
sealing ring
end of the pre-set time. If you wish
goblet
to stop before the pre-set time,
filler cap
press the stop button.
locking lid
G
Select one of the manual speed
filter
options - HIGH (III), MEDIUM (II) or
pulse button
LOW Speed (I). At the end of
OFF button
blending press the OFF button.
speed control buttons
G
Pulse button - operates the motor
pre-program buttons
in a start/stop action. The pulse
power unit
will operate for as long as the
cord storage
button is held down.
to use your blender
Important
blender
1 Fit the sealing ring ensuring the
G
To ensure long life of your blender,
seal is fully located under the rim
never run it for longer than 60
of the blade unit.
seconds. Switch off as soon as
Leaking will occur if the
you've got the right consistency.
seal is damaged or not
G
Don't process spices – they may
fitted correctly.
damage the plastic.
2 Hold the underside of the blade
G
The machine won't work if the
unit and insert the blades into
blender is fitted incorrectly.
the goblet - turn anti-clockise to
G
Don't put dry ingredients into the
lock .
blender before switching on. If
3 Put your ingredients into the
necessary, cut them into pieces;
goblet.
remove the filler cap; then, with
4 Clip the filter to the lid .
the machine running, drop them
G
The filter has two sieve sizes to
through one by one. Keep your
filter out any fibrous or
hand over the opening. Empty
unprocessed ingredients when
regularly.
pouring.
G
Don't use the blender as a storage
G
Turn the filler cap to change the
container. Keep it empty before
sieve size selected over the spout
and after use.
area
G
Never blend more than 1.6 litres
5 Fit and lock the lid by turning
or more than 800 mls for frothy
- ensure that the M
clockwise
liquids like milkshakes.
mark on the lid lines up with the L
G
Smoothie recipes - never blend
mark on the goblet. The
frozen ingredients that has formed
blender will not operate if
a solid mass during freezing, break
the lid is not fitted or not
it up before adding to the goblet.
locked correctly.
G
Always ensure that the filter is fitted
to the lid assembly before use.
.