Editing Titles - Kenwood DM-5090 Instruction Manual

When titles are assigned to a disc and its tracks, the titles
cannot only be displayed during playback but title search
44
(searching a track by the title) is also made possible. The
assigned titles can be changed or deleted with the same
procedure.
Preparation
1 Put the MD recorder to stop or play mode.
2 Press the TITLE INPUT key to switch the
title input mode on.

Editing titles

1
Select the item to be edited.
Main unit
1 Select whether the disc title or track title
is input.
JOG DIAL
4 ¢
To return To advance
2 Set the selection.
SET
To abort operation, press the TITLE INPUT key
again.
To input a title, go to step 2.
To change or delete a title, go to step 3.
Total number of title characters
Up to 1792 characters can be input per disc and up to 80
characters can be input per track. (In case of alphanumeric
and symbol characters)
A space (blank character) also required the same amount
of data as alphanumeric characters. When deleting a title,
it is not recommended to overwrite spaces on previous
characters but use the DELETE function.
Remote control unit
CHARACTER/
SEARCH
4
¢
To return To advance
SET
About preset titles
Easy title editing is possible by memorizing titles that you
often use or titles that you like at the optional preset titles.
Changing preset title names to new ones and imputing
those titles to the mini disc is carried out with the
"Editing titles" operation.
Initial settings are as follows.
PRE1: Pops, PRE2:Rock, PRE3:Classic, PRE4:Jazz, PRE5:Disco,
PRE6:Best Hits, PRE7:Air Check, PRE8:No., PRE9:Vol.
÷ To return a changed preset title to the initial setting, please refer to
"Operation to reset".
The modes are switched by rotating the JOG DIAL.
1 DISC
: Disc title
2 001
: Track title
3 PRE 1-PRE 9
: Preset title
4 ALL ERASE?
: Erasing both disc and track titles
÷ Editing is aborted if no operation has been performed for 8 seconds.
To edit a disc title: Select "DISC".
L 40 30 21 18 15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
TITLE
R
PGM SEARCH
D I S C A B C D E
MONITOR
To edit a track title: Select the desired track number.
L 40 30 21 18 15 12 9 7 5 3 1 0 OVER ( dB) ANALOG
TITLE
R
PGM SEARCH
0 0 3 - - - - -
MONITOR
To edit the preset titles: Select the desired preset number.
L 40 30 15 OVER ( dB)
21 18 12 9 7 5 3 1 0 ANALOG
TITLE
R
PGM SEARCH
P R E 4 J a z z MONITOR
To erase both disc and track titles.
15 OVER ( dB)
L 40 30 21 18 12 9 7 5 3 1 0 ANALOG
TITLE
R
PGM SEARCH
A L L E R A S E ? MONITOR
Characters usable in title editing
The following alphabets and symbols (ASCII codes) can
be selected for use in title editing.
Uppercase alphabets x 26 : ABCD...WXYZ
Lowercase alphabets x 26 : abcd...wxyz
Numerals x 10
Space & symbols x 26
Editing
DM-5090 (En)
p
DIGITAL
1 2 3
32kHz
44.1kHz
48kHz
DIGITAL
1 2 3
32kHz
44.1kHz
48kHz
DIGITAL
1 2 3
32kHz
44.1kHz
48kHz
DIGITAL
1 2 3
32kHz
44.1kHz
48kHz
: 0123456789
: !"#$%&'() +,-./:;<=>?@_`^